Search

Durethan BC30 000000

  _More Info 
  _Data sheet ASTM (PDF) 

 

Data sheet

PA 6, non-reinforced, injection molding, improved impact strength
 
ISO / ASTM
 
ISO Shortname:  ISO 16396-PA 6-I,,GR,S14-030
PropertyTest ConditionUnitStandardguide value1
 dry as moldedconditioned

Mechanical properties (23 °C/50 % r. h.)
Tensile modulus1 mm/minlb/in²ASTM D 638406000174000
Tensile stress at yield-lb/in²ASTM D 63894005800
Tensile elongation at yield-%ASTM D 6384.020
Tensile elongation at break-%ASTM D 63850> 50
Tensile stress at break-lb/in²ASTM D 638102008000
Izod notched impact strength73 °F, 0.125 inft·lb/inASTM D 2561.718
Izod notched impact strength-40 °F; 0.125 inft·lb/inASTM D 2561.51.5
Flexural modulus-lb/in²ASTM D 790319000116000
Flexural stress at 5 % strainlb/in²ASTM D 790116003600

Thermal properties
Deflection temperature under load, Unannealed66 psi; 0.157 in°FASTM D 648329
Deflection temperature under load, Unannealed264 psi; 0.157 in°FASTM D 648149

Other properties (23 °C)
Densitylb/in³ASTM D 7920.04
Specific gravity-ASTM D 7921.1

Notes
1Typical properties: these are not to be construed as specifications
Disclaimer
Standard Disclaimer
The manner in which you use and the purpose to which you put and utilize our products, technical assistance and information (whether verbal, written or by way of production evaluations), including any suggested formulations and recommendations, are beyond our control. Therefore, it is imperative that you test our products, technical assistance and information to determine to your own satisfaction whether they are suitable for your intended uses and applications. This application-specific analysis must at least include testing to determine suitability from a technical as well as health, safety and environmental standpoint. Such testing has not necessarily been done by us. Unless we otherwise agree in writing, all products are sold strictly pursuant to the terms of our standard conditions of sale. All information and technical assistance is given without warranty or guarantee, and is subject to change without notice. It is expressly understood and agreed that you assume and hereby expressly release us from all liability, in tort, contract or otherwise, incurred in connection with the use of our products, technical assistance and information. Any statement or recommendation not contained herein is unauthorized and shall not bind us. Nothing herein shall be construed as a recommendation to use any product in conflict with patents covering any material or its use. No license is implied or in fact granted under the claims of any patent.
Typical Properties
Property data is provided as general information only. Property values are approximate and are not part of the product specifications.
Flammability
Flammability results are based on small-scale laboratory tests for purposes of relative comparison and are not intended to reflect the hazards presented by this or any other material under actual fire conditions.
Health and Safety
Appropriate literature has been assembled which provides information concerning the health and safety precautions that must be observed when handling Envalior products mentioned in this publication. Before working with these products, you must read and become familiar with the available information on their hazards, proper use, and handling. This cannot be overemphasized. Information is available in several forms, e.g., material safety data sheets (MSDS) and product labels. Consult your Envalior representative or contact the Product Safety and Regulatory Affairs Department. For materials that are not Envalior products, appropriate industrial hygiene and other safety precautions recommended by their manufacturer(s) must be followed.
Regulatory Compliance
Some of the end uses of the products described in this brochure must comply with applicable regulations, such as the FDA, NSF, USDA and CPSC. If you have any questions on the regulatory status of any Envalior engineering thermoplastic, consult your Envalior representative or contact the Regulatory Affairs Manager.
Color and Visual Effects
Type and quantity of pigments or additives used to obtain certain colors and special visual effects can affect mechanical properties.
Envalior Performance Materials LLC | Pittsburgh, PA 15275
Date: 2023-12-19 16:19:21.0