Search

Durethan C38FAM 000000

  _More Info 
  _Data sheet ISO (PDF) 

 

Data sheet

PA 6-Copolymer, non-reinforced, extrusion, suitable for food-contact
 
ISO Shortname:  ISO 16396-PA 6/IPDI,,ES,S18-020
PropertyTest ConditionUnitStandardguide value
 d.a.m.cond.
Rheological properties
CMelt volume-flow rate235 °C; 2.16 kgcm³/(10 min)ISO 1133-15

Thermal properties
CMelting temperature10 °C/min°CISO 11357-1,-3212

Electrical properties (23 °C/50 % r. h.)
CRelative permittivity1 MHz-IEC 602503
CVolume resistivityOhm·mIEC 600931E11
CSurface resistivityOhmIEC 600931E11
CElectric strength1 mmkV/mmIEC 60243-130

Other properties (23 °C)
CWater absorption (Saturation value)Water at 23 °C%ISO 62~10
CWater absorption (Equilibrium value)23 °C; 50 % RH%ISO 62~3
CDensitykg/m³ISO 11831130

Processing recommendations
Drying temperature dry air dryer°C -80
Drying time dry air dryerh -2-6
CThese property characteristics are taken from the CAMPUS plastics data bank and are based on the international catalogue of basic data for plastics according to ISO 10350.
Disclaimer
Standard Disclaimer
The manner in which you use and the purpose to which you put and utilize our products, technical assistance and information (whether verbal, written or by way of production evaluations), including any suggested formulations and recommendations, are beyond our control. Therefore, it is imperative that you test our products, technical assistance and information to determine to your own satisfaction whether they are suitable for your intended uses and applications. This application-specific analysis must at least include testing to determine suitability from a technical as well as health, safety and environmental standpoint. Such testing has not necessarily been done by us. Unless we otherwise agree in writing, all products are sold strictly pursuant to the terms of our standard conditions of sale. All information and technical assistance is given without warranty or guarantee, and is subject to change without notice. It is expressly understood and agreed that you assume and hereby expressly release us from all liability, in tort, contract or otherwise, incurred in connection with the use of our products, technical assistance and information. Any statement or recommendation not contained herein is unauthorized and shall not bind us. Nothing herein shall be construed as a recommendation to use any product in conflict with patents covering any material or its use. No license is implied or in fact granted under the claims of any patent.
Typical Properties
Property data is provided as general information only. Property values are approximate and are not part of the product specifications.
Flammability
Flammability results are based on small-scale laboratory tests for purposes of relative comparison and are not intended to reflect the hazards presented by this or any other material under actual fire conditions.
Health and Safety
Appropriate literature has been assembled which provides information concerning the health and safety precautions that must be observed when handling LANXESS products mentioned in this publication. Before working with these products, you must read and become familiar with the available information on their hazards, proper use, and handling. This cannot be overemphasized. Information is available in several forms, e.g., material safety data sheets (MSDS) and product labels. Consult your LANXESS Corporation representative or contact the Product Safety and Regulatory Affairs Department at LANXESS. For materials that are not LANXESS products, appropriate industrial hygiene and other safety precautions recommended by their manufacturer(s) must be followed.
Regulatory Compliance
Some of the end uses of the products described in this brochure must comply with applicable regulations, such as the FDA, NSF, USDA and CPSC. If you have any questions on the regulatory status of any LANXESS engineering thermoplastic, consult your LANXESS Corporation representative or contact the LANXESS Regulatory Affairs Manager.
Color and Visual Effects
Type and quantity of pigments or additives used to obtain certain colors and special visual effects can affect mechanical properties.
LANXESS Corporation | Pittsburgh, PA 15275
Date: 01.05.2019