Search

Durethan BKV230 000000 DUS008

  _More Info 
  _Data sheet ISO (PDF) 

 

Data sheet

PA 6, 30% glass fibers, injection molding, improved impact strength
 
ISO Shortname:  ISO 16396-PA 6-I,GF30,GR,S14-080
PropertyTest ConditionUnitStandardguide value1
 d.a.m.cond.
Rheological properties
CMolding shrinkage, parallel60x60x2; 280 °C / MT 80 °C; 600 bar%ISO 294-40.3
CMolding shrinkage, transverse60x60x2; 280 °C / MT 80 °C; 600 bar%ISO 294-40.8
Post- shrinkage, parallel60x60x2; 120 °C; 4 h%ISO 294-40.07
Post- shrinkage, transverse60x60x2; 120 °C; 4 h%ISO 294-40.16

Mechanical properties (23 °C/50 % r. h.)
CTensile modulus1 mm/minMPaISO 527-1,-285004200
CTensile Stress at break5 mm/minMPaISO 527-1,-213080
CTensile Strain at break5 mm/min%ISO 527-1,-24.18.6
CCharpy impact strength23 °CkJ/m²ISO 179-1eU85100
CCharpy impact strength-30 °CkJ/m²ISO 179-1eU9590
CCharpy notched impact strength23 °CkJ/m²ISO 179-1eA2037
CCharpy notched impact strength-30 °CkJ/m²ISO 179-1eA1313
Izod impact strength23 °CkJ/m²ISO 180-1U7595
Izod impact strength-30 °CkJ/m²ISO 180-1U8080
Izod notched impact strength23 °CkJ/m²ISO 180-1A2035
Izod notched impact strength-30 °CkJ/m²ISO 180-1A1515
Flexural modulus2 mm/minMPaISO 178-A74004200
Flexural strength2 mm/minMPaISO 178-A205125
Flexural strain at flexural strength2 mm/min%ISO 178-A4.86.6
Flexural stress at 3.5 % strain2 mm/minMPaISO 178-A190100

Thermal properties
CMelting temperature10 °C/min°CISO 11357-1,-3220
CTemperature of deflection under load1.80 MPa°CISO 75-1,-2198
CTemperature of deflection under load0.45 MPa°CISO 75-1,-2218
CBurning behavior UL 941.5 mmClassUL 94HB
CBurning behavior UL 940.75 mmClassUL 94HB

Other properties (23 °C)
CDensitykg/m³ISO 11831320

Processing conditions for test specimens
CInjection molding-Melt temperature°CISO 294280
CInjection molding-Mold temperature°CISO 29480

Processing recommendations
Drying temperature dry air dryer°C -80
Drying time dry air dryerh -2-6
Residual moisture content%Acc. to Karl Fischer 0.03-0.12
Melt temperature (Tmin - Tmax)°C -260-290
Mold temperature°C -80-100

Notes
1Typical properties: these are not to be construed as specifications
CThese property characteristics are taken from the CAMPUS plastics data bank and are based on the international catalogue of basic data for plastics according to ISO 10350.
Disclaimer
Standard Disclaimer
The manner in which you use and the purpose to which you put and utilize our products, technical assistance and information (whether verbal, written or by way of production evaluations), including any suggested formulations and recommendations, are beyond our control. Therefore, it is imperative that you test our products, technical assistance and information to determine to your own satisfaction whether they are suitable for your intended uses and applications. This application-specific analysis must at least include testing to determine suitability from a technical as well as health, safety and environmental standpoint. Such testing has not necessarily been done by us. Unless we otherwise agree in writing, all products are sold strictly pursuant to the terms of our standard conditions of sale. All information and technical assistance is given without warranty or guarantee, and is subject to change without notice. It is expressly understood and agreed that you assume and hereby expressly release us from all liability, in tort, contract or otherwise, incurred in connection with the use of our products, technical assistance and information. Any statement or recommendation not contained herein is unauthorized and shall not bind us. Nothing herein shall be construed as a recommendation to use any product in conflict with patents covering any material or its use. No license is implied or in fact granted under the claims of any patent.
Typical Properties
Property data is provided as general information only. Property values are approximate and are not part of the product specifications.
Flammability
Flammability results are based on small-scale laboratory tests for purposes of relative comparison and are not intended to reflect the hazards presented by this or any other material under actual fire conditions.
Health and Safety
Appropriate literature has been assembled which provides information concerning the health and safety precautions that must be observed when handling Envalior products mentioned in this publication. Before working with these products, you must read and become familiar with the available information on their hazards, proper use, and handling. This cannot be overemphasized. Information is available in several forms, e.g., material safety data sheets (MSDS) and product labels. Consult your Envalior representative or contact the Product Safety and Regulatory Affairs Department. For materials that are not Envalior products, appropriate industrial hygiene and other safety precautions recommended by their manufacturer(s) must be followed.
Regulatory Compliance
Some of the end uses of the products described in this brochure must comply with applicable regulations, such as the FDA, NSF, USDA and CPSC. If you have any questions on the regulatory status of any Envalior engineering thermoplastic, consult your Envalior representative or contact the Regulatory Affairs Manager.
Color and Visual Effects
Type and quantity of pigments or additives used to obtain certain colors and special visual effects can affect mechanical properties.
Envalior Performance Materials LLC | Pittsburgh, PA 15275
Date: 2023-12-20 09:58:25.0