Search

Pocan DPT7140LDS 000000

  _More Info 
  _Data sheet ISO (PDF) 

 

Data sheet

PET+PBT, 44 % glass fibers/mineral, injection molding, LDS, high thermal dimension stability
 
ISO Shortname:  ISO 20028-PET+PBT,(GF+MD)44,GHMR,07-120
PropertyTest ConditionUnitStandardguide value
Rheological properties
CMelt volume-flow rate280 °C; 2.16 kgcm³/(10 min)ISO 1133-121
CMolding shrinkage, parallel60x60x2; 280°C / WZ 110°C; 600 bar%ISO 294-40.2
CMolding shrinkage, transverse60x60x2; 280°C / WZ 110°C; 600 bar%ISO 294-40.7
Post- shrinkage, parallel60x60x2; 120 °C; 4 h%ISO 294-40.1
Post- shrinkage, transverse60x60x2; 120 °C; 4 h%ISO 294-40.2

Mechanical properties (23 °C/50 % r. h.)
CTensile modulus1 mm/minMPaISO 527-1,-212700
CTensile Stress at break5 mm/minMPaISO 527-1,-2110
CTensile Strain at break5 mm/min%ISO 527-1,-21.3
CCharpy impact strength23 °CkJ/m²ISO 179-1eU30
CCharpy impact strength-30 °CkJ/m²ISO 179-1eU25
CCharpy notched impact strength23 °CkJ/m²ISO 179-1eA<10
CCharpy notched impact strength-30 °CkJ/m²ISO 179-1eA<10
Izod impact strength23 °CkJ/m²ISO 180-1U25
Izod impact strength-30 °CkJ/m²ISO 180-1U25
Izod notched impact strength23 °CkJ/m²ISO 180-1A<10
Izod notched impact strength-30 °CkJ/m²ISO 180-1A<10
Flexural modulus2 mm/minMPaISO 178-A12800
Flexural strength2 mm/minMPaISO 178-A170
Flexural strain at flexural strength2 mm/min%ISO 178-A1.7

Thermal properties
CMelting temperature10 °C/min°CISO 11357-1,-3255
CTemperature of deflection under load1.80 MPa°CISO 75-1,-2210
CTemperature of deflection under load0.45 MPa°CISO 75-1,-2250
Vicat softening temperature50 N; 120 °C/h°CISO 306225
CCoefficient of linear thermal expansion, parallel23 to 55 °C10-4/KISO 11359-1,-20.2
CCoefficient of linear thermal expansion, transverse23 to 55 °C10-4/KISO 11359-1,-20.5
CBurning behavior UL 94ClassUL 94HB
Thermal conductivity23 °CW/(m·K)ISO 83020.3

Electrical properties (23 °C/50 % r. h.)
CRelative permittivity100 Hz-IEC 602504.3
CRelative permittivity1 MHz-IEC 602504.1
CDissipation factor100 Hz10-4IEC 6025022
CDissipation factor1 MHz10-4IEC 60250138
CVolume resistivityOhm·mIEC 600932E18
CSurface resistivityOhmIEC 600935.4E16
CElectric strength1 mmkV/mmIEC 60243-133
CComparative tracking index CTISolution ARatingIEC 60112250

Other properties (23 °C)
CDensitykg/m³ISO 11831740
Bulk densitykg/m³ISO 601000

Material specific properties
CViscosity numbercm³/gISO 1628-550

Processing conditions for test specimens
CInjection molding-Melt temperature°CISO 294280
CInjection molding-Mold temperature°CISO 294110

Processing recommendations
Drying temperature circulating air dryer°C -120
Drying time circulating air dryerh -4-8
Residual moisture content%Acc. to Karl Fischer 0-0.02
Melt temperature (Tmin - Tmax)°C -270-290
Mold temperature°C -100-130
CThese property characteristics are taken from the CAMPUS plastics data bank and are based on the international catalogue of basic data for plastics according to ISO 10350.
Disclaimer
Standard Disclaimer
The manner in which you use and the purpose to which you put and utilize our products, technical assistance and information (whether verbal, written or by way of production evaluations), including any suggested formulations and recommendations, are beyond our control. Therefore, it is imperative that you test our products, technical assistance and information to determine to your own satisfaction whether they are suitable for your intended uses and applications. This application-specific analysis must at least include testing to determine suitability from a technical as well as health, safety and environmental standpoint. Such testing has not necessarily been done by us. Unless we otherwise agree in writing, all products are sold strictly pursuant to the terms of our standard conditions of sale. All information and technical assistance is given without warranty or guarantee, and is subject to change without notice. It is expressly understood and agreed that you assume and hereby expressly release us from all liability, in tort, contract or otherwise, incurred in connection with the use of our products, technical assistance and information. Any statement or recommendation not contained herein is unauthorized and shall not bind us. Nothing herein shall be construed as a recommendation to use any product in conflict with patents covering any material or its use. No license is implied or in fact granted under the claims of any patent.
Typical Properties
Property data is provided as general information only. Property values are approximate and are not part of the product specifications.
Flammability
Flammability results are based on small-scale laboratory tests for purposes of relative comparison and are not intended to reflect the hazards presented by this or any other material under actual fire conditions.
Health and Safety
Appropriate literature has been assembled which provides information concerning the health and safety precautions that must be observed when handling LANXESS products mentioned in this publication. Before working with these products, you must read and become familiar with the available information on their hazards, proper use, and handling. This cannot be overemphasized. Information is available in several forms, e.g., material safety data sheets (MSDS) and product labels. Consult your LANXESS Corporation representative or contact the Product Safety and Regulatory Affairs Department at LANXESS. For materials that are not LANXESS products, appropriate industrial hygiene and other safety precautions recommended by their manufacturer(s) must be followed.
Regulatory Compliance
Some of the end uses of the products described in this brochure must comply with applicable regulations, such as the FDA, NSF, USDA and CPSC. If you have any questions on the regulatory status of any LANXESS engineering thermoplastic, consult your LANXESS Corporation representative or contact the LANXESS Regulatory Affairs Manager.
Color and Visual Effects
Type and quantity of pigments or additives used to obtain certain colors and special visual effects can affect mechanical properties.
LANXESS Corporation | Pittsburgh, PA 15275
Date: 06.07.2019