Durethan® is the trade name for our range of engineering thermoplastics based on polyamide 6 and polyamide 66.

Polyamides are partially crystalline plastics which offer an ideal combination of properties especially for technical applications. They combine a high mechanical strength and stiffness with good electrical insulation properties, a high resistance to heat and chemicals, low friction, good emergency running properties, wear resistance and the attenuation of noise and vibration, plus outstanding ease of processing.

Depending on the particular material and grade concerned, polyamides absorb moisture from the environment on a reversible basis. This has the same effect as a plasticizer, i.e. the tensile strain at break and toughness increase while the strength and stiffness are reduced.

The below mentioned Durethan product categories are available:
PA 6 
PA 6-Copolymer 
PA 66 
PA 6I 

Beside non-reinforced grades we offer. depending on the base polymer, fillers like e.g.:
glass fiber 
glass fiber/glass beads 
glass fiber/mineral 
glass fiber/carbon fiber 
glass beads 
carbon fiber 

Grades with special properties are available like e.g.:
improved flowability (EasyFlow, XtremeFlow) 
flame-retardant (halogen-free) 
improved impact strength 
improved thermal conductivity 
improved electrical conductivity 

To find specific grades depending on Polymer Class, Processing, Filler, Product Property please try our
convenient Product Search Product Search.

Following you will find additional information, e.g. (for some sections a login is mandatory)
product characteristicsproduct characteristics 
Durethan Injection Molding Grades; Product Range with Reference DataDurethan Injection Molding Grades; Product Range with Reference Datalogin
Durethan Extrusion Grades; Product Range with Reference DataReference Data: Film and Extrusion Grades, Base Resinslogin
Product Searchconvenient Product Search to find specific grades by Polymer Class, Processing, Filler, Product Property 
moreall Durethan information