Search

Metal hybrid technology

Icon HomeMetal hybrid technologyHybrid technology with nylon composite sheetE-Mailwechseln zu DE


 
Compared with conventional injection molding, hybrid technology enables complex structures to be produced that were previously inconceivable using plastics alone because of their properties.


Example of a hybrid structure
Example of a hybrid structure


Both theoretical studies and components manufactured in series have shown that metal-plastic composites can have better load-bearing properties than open or closed metal profiles. With optimized ribbing, the hybrid components are almost on a par with the closed metal solutions – even under torsional stress – but are more temperature-dependent.

In addition to their cost and weight advantages, hybrid components offer interesting integration and design options, given suitable volumes. By consistently implementing hybrid constructions (with their high precision, integration, and mechanical performance capabilities), component costs can be reduced by up to 30 %, investment costs by up to 50 %, and component weight by up to 40 %.

In the case of structural components that need to respond well to stress (temperature, applied loads and dynamics), different grades of polyamide and different insert materials (steel, aluminum or magnesium as well as continuous fiber-reinforced semi-finished plastics) can be used.
Durethan® (usually PA 6 GF15 – GF60) has proven to be a suitable material for the plastic component.

The design flexibility of the plastic structure allows for optimum component design. This, in turn, facilitates good force distribution in the component and prevents stress peaks. The uniformly distributed product characteristics of Durethan®, which can be reproduced in the finished component, also facilitate challenging designs using CAE.

The production of hybrid components is based on standard injection molding processes using conventional injection molding machines and molds. Use of inserts means that only some additional handling equipment and adjustments to the mold are required.

Hybrid technology is today used in over 70 series applications and 50 million manufactured components.

The 1999 C170 Ford Focus GOR from Ford Motor Company, has been named the 2019 Hall of Fame winner by the Automotive Division of the Society of Plastics Engineers (SPE®).



Additional information:
pdfHybrid Components in Series ProductionTechCenter HPM
pdfRoof-frame design using hybrid technologyTechCenter HPM
pdfThe recycling of hybrid components (login mandatory)TechCenter HPM
Icon Link extLANXESS enters SPE® Automotive Innovation Awards Hall of FameLANXESS Corporate US website
Icon Link extFIRST PLASTIC-METAL HYBRID FRONT END STRUCTURE
NAMED 2019 SPE® AUTOMOTIVE INNOVATION AWARDS “HALL OF FAME” WINNER
SPE website
Icon Link extCategory Winner: HALL OF FAME - PMH front end structureSPE website
   
search hybrid*... or via the full text search optionTechCenter HPM
 
lock close login mandatory